Click on the image to check the artwork
20 Tons Mining Transport Truck is a heavy-duty transport equipment for mining and underground engineering. It is mainly composed of a high-performance engine, a sturdy body structure, an advanced control system, and an efficient dump device, and is widely used in mining, tunnel engineering, water conservancy engineering, and other fields.
High load capacity
The 20 Tons Mining Transport Truck uses high-strength steel plates to manufacture the body, and the body structure is sturdy and durable. At the same time, it is equipped with a high-power engine and a reinforced suspension system to ensure that the truck can travel stably under heavy loads. Its rated load capacity reaches 20 tons, and it can easily handle various types of ores, slag, and other heavy objects in actual transportation, meeting the transportation needs of mining and engineering construction.
Excellent adaptability
The body design fully considers the special environment of mines and underground engineering, with a ground clearance of more than 300mm and a climbing ability of more than 15 degrees. At the same time, the use of advanced four-wheel-drive systems and differential lock technology ensures that the truck can maintain good passability and stability in complex terrains such as rugged roads, uphill, and downhill.
Powerful power system
The 20 Tons Mining Transport Truck is equipped with a domestic brand Yuchai power engine, which uses advanced combustion technology and turbocharging technology, making the engine power output strong, torque large, and combustion efficiency high. At the same time, a quick-shift gearbox and a reinforced drive shaft, ensure that the power transmission is more stable and flexible. The engine power is as high as about 300 horsepower and the torque reaches hundreds of Nm, providing sufficient support for the truck.
Efficient self-unloading function
The hydraulic lifting system is used to realize the self-unloading function of the carriage. The high-pressure oil enters the lifting cylinder through the distribution valve and the oil channel to push the carriage to tilt and unload. The lifting angle of the carriage reaches dozens of degrees, and the unloading time only takes a few minutes.
- The oil quantity and quality of the diesel engine should be checked regularly to ensure its normal operation and avoid damage to the engine due to excessive consumption of diesel. It is recommended to change the oil every 5,000 kilometers or in accordance with the requirements of the engine manual.
- When starting the 20 Tons Mining Transport Truck, follow the instructions in the engine manual to avoid causing unnecessary wear to the engine. It is advisable to preheat the engine before starting to ensure all components are adequately lubricated.
- When the engine runs at high speed for a long time, it should continue to idle for a few minutes before shutting down to prevent heat accumulation from damaging the engine. It is recommended that the idling time should be no less than 5 minutes.
1: Payment:
30% advance payment after signing the contract, 70% balance should be paid before delivery. We can accept T/T and L/C
2. Delivery time:
25-45 working days after payment is received. According to different truck models
3. How about your product quality?
The products have passed the ISO, CCC, SGS, BV, and CONTECNA qualification certification. All our spare parts are from the original manufacturers with original part number and anti-fake label, the quality is 100% guaranteed.
4: How long is the warranty period?
The warranty of our products is 1 year or 50000km, which comes first.
http://www.cskyjx.com/